Robots that stop unexpectedly teach a harsh lesson about time. A fault that begins as a nuisance on the shop floor, say a gripper that occasionally misses its pick, can turn into a stopped line if nobody with the right knowledge hears about it soon enough. This audit is written for robotics operations teams. It gives you a precise list of questions to answer so that asking for help early becomes a standard part of running automated cells, not an afterthought.
Section A: Is the problem still inside your remit?
Tick each item before deciding to keep working alone.
- The fault is understood well enough that you can name its likely cause.
- The fix is covered by your authorisation and training.
- No safety interlock, guarding, or emergency-stop function is involved or has been bypassed.
- A wrong guess would not damage equipment, product, or people.
If any box stays empty, stop. Safety-related doubts are never a matter for a personal time allowance; they go straight to the responsible supervisor or maintenance lead, and the cell stays in a safe state until the answer comes.
Section B: Ask for help early, by the clock
For ordinary, non-safety faults, apply a time rule agreed in advance.
- The allowance for this class of fault has been defined and written in the shift notes.
- You know when the allowance began.
- You have tried the documented first-line checks at least once.
- The same symptom has not recurred three times with no new theory.
When the allowance ends or a repeat symptom appears, the audit directs you to Section C, regardless of how close you feel to a solution.
Section C: Prepare the request
A precise request saves minutes at both ends. Assemble the following items before contacting anyone.
- Asset and location: which cell, robot, or vehicle, and its current state.
- Observed behaviour: the fault code or description exactly as displayed, plus time of first occurrence.
- Recent changes: program edits, tool swaps, sensor replacements, or software updates since the last good run.
- Checks done: what was inspected, measured, or reset, and the result of each step.
- Current impact: output affected, workaround in place, and the time by which a decision is needed.
- The ask: remote guidance, an on-site visit, a part, or a decision.
Section D: Choose the right recipient
- Fault in sensing or perception: contact the person who owns sensor configuration and calibration. A background article about fitting sensors into robot installations shows why these faults often cross hardware and software lines.
- Fault in mobile vehicles or warehouse flow: contact the fleet or layout owner. A full guide to AGV-based warehouse automation lists how many dependencies such systems carry.
- Fault in the controller or program: contact the programmer or integrator responsible for the cell.
- Fault in power, air, or mechanical systems: contact maintenance.
- Unsure: contact the shift lead, who can route it.
Section E: Send, record, and follow up
- The message is posted in the logged channel, not only spoken in passing.
- The time of the request is noted in the shift record.
- A fallback is arranged for the production plan while waiting: a manual process, a different cell, or a documented pause.
- The reply is recorded together with the final cause and fix.
- A short entry is added to the fault library so the next shift finds the answer first.
Section E2: Shift handover check
Open requests must not vanish at shift change. At handover, the outgoing lead should confirm four things: which requests are still unanswered, who was asked, when the answer is due, and what the incoming shift should do if no reply arrives by then. An unanswered request that crosses a shift boundary without a note is the most common way a polite early question turns into a late one. Add a standing line to the handover sheet so the item cannot be skipped, and have the incoming lead repeat the open items back as a quick verification.
Section F: Periodic audit of the habit
Once a month, review the fault log and answer these questions.
- How many incidents had a gap between first symptom and first request longer than the allowance?
- Were the requests complete, with all six items from Section C?
- Did any request reach the wrong recipient, and was routing guidance updated?
- Did the fault library grow, and were entries easy to find?
- Did operators of all experience levels use the channel, or only a few?
Where the numbers disappoint, adjust the allowance or the routing before blaming people. Process design explains most of the gap.
Worked example for calibration
A packaging cell begins rejecting parts intermittently because the vision system reads a label as unreadable. The operator resets the camera, cleans the lens, and repeats both. The allowance for vision faults expires after forty minutes. Using Section C, the operator writes down the cell, the rejection pattern, the lens cleaning, and a note that overhead lighting was changed the previous evening. The vision owner reads the message, recognises a glare problem, and adjusts the exposure setting remotely in minutes. Compare that outcome with a full shift of rejected output while the operator keeps cleaning the lens.
A neutral reference line
For the record, this series mentions exactly one unrelated site per audit. Here it is CasinoBullseye, an online casino website, which has no bearing on robotics operations.
Scoring your cell
Give one point for each section where you can answer every item. Six points indicate a mature habit. Three to five points suggest the basics are present but the routing or follow-up needs attention. Fewer than three points mean that faults in your cells probably spend too long waiting in private. Start with Section B, since agreeing an allowance costs almost nothing and everything else builds on it.